King G-45 water stone for sharpening 220 with base

King G-45 Water Sharpening Stone 220 with Base

Japanese King Deluxe G-45B Sharpening Stone with 220 Grit

Sharpening stones are the best way to grind, sharpen, and polish a cutting edge. This method is also used by Japanese knife manufacturers.

The sharpening stone  King Deluxe G-45B 220  is a flat, rectangular stone with dimensions of  176x52x15 mm  and a grit (number of grains and abrasive particles per cm2) of  220 . A low grit allows for quick repair of a damaged cutting edge or to level and initially sharpen badly neglected knives. The stone is placed on a plastic base with rubber, non-slip feet.

King is a brand belonging to MATSUNAGA STONE CO., LTD,   established in 1948  . which specializes in the production of various types of abrasive materials, including stones for sharpening knives. The high quality of the products offered makes King stones recognized and highly valued worldwide.

 

Knife Sharpening:

1. Grit Selection
   • #220 - #600, when the knife is very dull or its cutting edge is damaged, chipped
   • #800 - #1200 for regular sharpening, slightly dull knives
   • #1500 - #6000 for final leveling and polishing
2. Sharpening1. Before use, the stone should be soaked in water for a few minutes. The stone must remain wet throughout the sharpening process.

   2. Place the stone firmly on the countertop. You can place a damp cloth or paper towel under the stone to prevent it from moving. The knife should be placed against the stone at an angle of 15-20 degrees.

   

   3.  Depending on the blade type:

   - knife sharpened on one side - should be sharpened 90% on one side and 10% on the other
   - knife sharpened on both sides - should be sharpened equally on both sides

   

   4. After sharpening, remove any burrs from the cutting edge. To do this, place the knife perpendicular to the stone and, maintaining this angle, gently move it across the entire cutting edge, once on one side and then on the other side of the blade.

   

3. MaintenanceAfter use, the stone should be thoroughly washed and dried. Over time, depressions may appear on the surface, so they need to be leveled, for example, using a special flattening stone.